How to use air compressor to inflate tires

An Air compressor is a type of tool that uses raw air from the environment, stores it and then use it for lateral purposes such as to inflate tires, for vacuum cleaners, for framing nailers and many more. This machine is a game – changer in the industrial world too.

Almost all automobile factories around the world have air compressors in their assembly line. As we have mentioned it earlier that air compressors can be used for many purposes and one of them is to inflate tires, we will provide you the manual of inflating a tire by using an air compressor.

We expect your perseverance to read all the way to the end of the article as it is for your own convenience!

First of all you have to make sure that there is enough PSI and CFM available in your air compressor. Normally, to inflate a bike or car tire, you need maximum 110 PSI and about 2 CFM. If your compressors ability matches your requirements, then you can proceed to the next step.

Fully empty the tire that you are going to inflate. Yes, you can inflate it while having existing air in it. But we suggest you to empty it first to avoid any issues like leakage and explosion.

Once you have done these, you have to attach the hose pipe to the both ends of the compressor and the tire’s tube. Make sure that it has been connected perfectly.

Before turning on the air compressor, check if the electric lines are okay or not. If you have a malfunctioned line, we suggest you to use a cordless air compressor.

Cordless air compressors are easy to use and they do not have any issue with the main electric line of your house. So, we can say that in these terms, cordless compressors are safer and more appreciated.

You should check the cylinder of your compressor too. In this case, it doesn’t matter if you have a corded or cordless air compressor.

The cylinder/tank of your compressor should contain enough air to inflate your tires.

Once you are done with all these, you can turn on the compressor.

We suggest you to start with lower pressure and gradually increase it. It is because the sudden flow of air can damage your tires if you hit it with a huge blow of air.

To avoid that, start with minimal pressure and then reach to your desired level to inflate the tires.

Keep an eye on the pressure gauge to check the level of your pressure and to have control on the overall process.

After inflating the tire, slowly pull the hose pipe and then turn off the compressor. Don’t rush on anything as these procedures are to be handled with care.

Put your compressor in a fine dry and cold place, away from the direct sun rays.

How to air up a tire with an air compressor?

An air compressor is a sort of gear that draws raw air from the surrounding environment, stores it, and then utilizes it for a variety of further functions, including inflating tires, powering vacuum cleaners and frame nailers, and many more applications.

This machine is a game-changer not only in the business world but also in the industrial sector. Air compressors are standard equipment in the production lines of virtually all of the world’s vehicle assembly plants.

As we have mentioned it earlier that air compressors can be used for many purposes, and one of them is to inflate tires, in this article we will provide you with the manual of how to inflate a tire by using an air compressor.

Pumping up tires is one of the many uses that we have mentioned that air compressors can be used for. Because this article has been written just for your ease of use, we expect you to have the patience to read it all the way through to the finish.

First, you have to make sure that your air compressor has enough PSI and CFM. Most of the time, you need no more than 100 PSI and about 2-3 CFM to pump up a bike or car tire. If the capabilities of your compressor match what you need, you can move on to the next step.

Make sure the tire you’re going to fill is completely empty. Yes, you can pump up something that already has air in it. But we recommend that you empty it first to prevent problems like leaks and explosions.

When you’ve done these things, you’ll need to connect the hose to both ends of the compressor and the tube of the tire. Make sure it’s been put on appropriately.

You should make sure the power lines are secure before you start on the air compressor. We advise using a portable air compressor on a faulty line.

Fifth, cordless air compressors are convenient since they don’t require any modifications to your home’s electrical system. Consequently, in this context, cordless compressors are preferred for both safety and convenience.

Look at the cylinder in your compressor, too. To do this task, either a corded or cordless air compressor would work.

Make sure there is enough air in the compressor’s cylinder/tank to fill the tires.

After step 8 is complete, the compressor can be activated.

We recommend that you begin with a lower pressure and work up to the recommended level. It’s because a strong gust of wind might inflict damage to your tires if you hit it head-on.

To avoid that from happening, you should begin inflating the tires with a low pressure and gradually increase it until you reach the appropriate level.

Always monitor the pressure gauge to maintain command of the whole operation and ensure proper pressure is being applied.

Once the tire is inflated, disconnect the line and switch off the compressor. Please take your time and be methodical with these processes.

Keep your compressor out of the direct sunlight and in a cool, dry location, preferably one with a low ambient temperature.